PRODUCTS CATEGORY



Disperse Dye

Hicron dyestuffs of Phitsit Intergroup are disperse dyestuffs for polyester fiber with variety of shades and excellent properties.


E Type

Dyestuffs which show excellent levelling property, and are applied mainly to high temperature dyeing and carrier dyeing and to P/N, P/W. etc.Tend to have lower wet and rubbing fastness properties following strong aftertreatment. In this group, there are lots of dyestuffs suitable for pale-shade dyeing and dyeing of filament fabrics.

Hicron E Colour

Small molecule disperse dyes with low to medium sublimation fastness.







C.I. NO PROPERTIES FASTNESS
H.T. Carrier Therm
sol
Printing HTS Light Xenon B 02 Sublimation 30 s. at
180oC
Washing 60oC (C06/C2) on PES

 
0.50% Disperse Yellow 54 ++ ++ + - 7 3-4 4-5
Yellow E-3GL 200%
  1.10% Disperse Red 60 ++ ++ - - 5-6 2 4
Red E-FBL 200%
  1.20% Disperse Blue 56 ++ ++ + - 6-7 3 4-5
Blue E-2BLN
  0.65% Disperse Yellow 64 ++ ++ + - 7-8 4 4-5
Yellow E-3G 200%
  0.55% Disperse Orange 25 ++ ++ + + 5-6 3 4-5
Orange E-3R 200%
  1.80% Disperse Red 91 ++ ++ + + 7-8 3-4 4
Pink E-REL 200%
  1.00% Disperse Red 65 ++ ++ - - 5 3-4 4
Dark Red PGA 150%
  0.80% Disperse Red 50 ++ ++ - - 6 2-3 4-5
Red E-R 200%
  1.60% Disperse Violet 27 ++ ++ + - 6-7 2 5
Brilliant Violet E-BLN
  1.40% Disperse Violet 28 ++ ++ + - 6 2-3 4
Violet E-RL 200%
  1.00% Disperse Blue 56 ++ ++ + - 6-7 3 4-5
Blue E-FBL 150%

totop

Hicron LS Properties

  • Broad shade range
  • Compact range with similar dyeing behavior
  • High fastness properties
  • Dyeing at pH 4.0 - 4.5 at 135oC
  • Same dyeing methods for all shade depths
Hicron LS Colour

Suitable for microfiber polyester dyeing







C.I. NO Light
( AATCC 16E 40 hr. )

Sublimation stain on polyester
Washing stain on polyester
pH range
 
1.00% - 6 3-4 4 4-8
Yellow 4GN-LS
  1.00% - 6 2-3 4-5 4-9
Red TB-LS
  2.00% - 7 2-3 3 4-9
Blue RL-LS
  2.00% - 6 4-5 4-5 4-9
Yellow Brown 2R-LS
  2.00% - 6 3-4 4 4-9
Red 3B-LS
  2.00% - 6 4-5 4-5 4-9
Blue BG-LS
  2.00% - 6 4 4 4-5
Scarlet RN-LS
  2.00% - 7 4 4-5 4-5
Red 4BN-LS
  2.00% - 7 4 5 4-9
Brilliant Blue 2GN-LS
  6.00% - 6 3 3 4-5
Brilliant Blue 2GN-LS
  8.00% - 6 3 3 4-5
Black R-LS

totop

S Type

Dyestuffs which show excellent sublimation fastness and can sufficiently control heat treatment process afte r dyeing , such as pleat and permanent press finishing, and are applied mainly to high temperature dyeing , thermosol dyeing and printing. The dyestuffs which belong to this group possess excellent high - temperature exhaustion , but have poor migration properties. However , such dyestuffs possess excellent potting and hot - water fastness properties and also excellent durability to after-finishing. As they generally have excellent sublimation fastness, these dyestuffs are very suitable for high-temperature or thermosol dyeing.

Hicron S Colour

Economical range of high-energy dye with high fastness to contact heat.







C.I. NO PROPERTIES FASTNESS
H.T. Carrier Therm sol Printing HTS Light Xenon B 02 Sublimation 30 s. at
180oC
Washing 60oC (C06/C2) on PES
 
1.10% Disperse Orange 30 ++ + 210oC ++ 6-7 4-5 4-5
Y/Brown S-2R 150%
  0.75% Disperse Red 167 ++ + 210oC ++ >7 4-5 4
Rubine S-2G 150%
  1.80% Disperse Blue 79 ++ - 220oC ++ 5-6 4-5 4
Navy Blue S-2GL 200%
  0.90% Disperse Yellow 114 ++ + 210oC ++ 7 4-5 5
Yellow S-6G 200%
  0.40% Disperse Yellow 198 ++ + 220oC ++ >7 5 5
Yellow S-3G
  1.00% Disperse Yellow 79 ++ - 210oC ++ 7 4-5 4-5
Yellow S-G
  1.65% Disperse Orange 30 ++ + 210oC ++ 7 4-5 4-5
Y/Brown S-2RFL
  1.00% Disperse Orange 73 ++ + 210oC ++ 6-7 5 4-5
Orange RSF 200%
  0.83% Disperse Red 153.1 ++ - 220oC ++ 5 4-5 4
Red S-4G
  0.83% Disperse Red 177 ++ - 220oC ++ 5-6 5 4-5
Red S-G
  2.35% Disperse Red 92 ++ + 210oC ++ 6-7 4-5 4
Red S-BEL
  1.00% Disperse Red 167 ++ + 210oC ++ >7 4-5 4
Rubine S-2GFL
  1.35% Disperse Red 167 ++ + 210oC ++ 6-7 4-5 4
Red S-5BL
  0.50% Disperse Violet 63 ++ + 190oC ++ 5-6 4 4
Violet S-3RL 200%
  0.45% Disperse Violet 77 ++ + 210oC ++ 6-7 4-5 4-5
Violet S-4RL 200%
  0.38% Disperse Blue 165 ++ - 220oC ++ 5-6 4-5 4
Blue S-BB 200%
  0.50% Disperse Blue 366 ++ - 210oC ++ 6 4 4
Blue S-CR 200%
  2.00% Disperse Blue 60 ++ + 210oC ++ >7 3-4 5
Turquoise Blue S-GL 200%
  1.80% - ++ + 210oC ++ 6-7 3-4 5
Turquoise Blue G 300%
  2.00% Disperse Orange 31 ++ + 210oC ++ 6 4 4
Orange S-RN
  1.30% Disperse Red 153 ++ + 200oC ++ 5-6 4 4-5
Scarlet GS 200%
  0.75% Disperse Red 152 ++ - 210oC ++ 5-6 4 4
Light Red BS 200%
  1.15% Disperse Violet 33 ++ + 210oC ++ 6-7 4 4-5
Rubine 2BSF 200%
  1.90% Disperse Brown 1 ++ + 210oC ++ 4 4-5 5
Brown 3RS Conc.
  1.00% Disperse Blue 257 ++ - 220oC ++ 6-7 4 5
Blue S-3RF
  0.95% - ++ - 210oC ++ 5-6 4-5 4-5
Blue S-CB
  3.00% Disperse Blue 79 ++ - 220oC ++ 5-6 4-5 4
Navy Blue GRL-SF 200%

totop

 
Hicron ACE Colour

Trichromatic for pale shade.







C.I. NO PROPERTIES FASTNESS
H.T. Carrier Therm sol Printing HTS Light Xenon B 02 Sublimation 30 s. at
180oC
Washing 60oC (C06/C2) on PES
 
0.50% - ++ ++ + + 6 3-4 3-4
Yellow ACE
  0.50% - ++ ++ + + 6 3-4 3-4
Red ACE
  0.50% - ++ ++ + + 6 3-4 3-4
Blue ACE

totop

Hicron UN-SE Colour

Compatible selection of good levelling dyes for medium to heavy shade.







C.I. NO PROPERTIES FASTNESS
H.T. Carrier Therm sol Printing HTS Light Xenon B 02 Sublimation 30 s. at
180oC
Washing 60oC (C06/C2) on PES
 
0.90% - ++ ++ 200oC - 7 3-4 4
Yellow UN-SE
  1.10% - ++ - 200oC + 6-7 4 4
Orange UN-SE
  1.50% - ++ - 200oC + 6 3-4 3-4
Red UN-SE
  1.20% - ++ + 210oC + 6 3-4 4
Rubine UN-SE
  1.40% - ++ - 200oC + 5-6 3-4 4
Blue UN-SE
  2.00% - ++ - 210oC + 5-6 4 3-4
Navy Blue UN-SE

totop

 
Hicron CC Colour

Suitable for dyeing of polyester woven and knit fabrics







C.I. NO Light
( AATCC 16E 20 hr. )

Sublimation stain on polyester
Washing stain on polyester
pH range
 
1.40% Disperse Yellow 241 7 3-4 4 4-8
Yellow CC
  0.70% - 6-7 4 4-5 4-9
Yellow Brown CC
  0.85% - 6-7 4 4-5 4-9
Orange CC
  0.83% Disperse Red 153.1 5-6 4 4-5 4-8
Scarlet CC
  0.75% - 5-6 4 4 4-9
Cherry CC
  0.60% Disperse Red 343 5-6 3-4 4 4-8
Red CC
  0.63% Disperse Red 73 6-7 4 4-5 4-8
Rubine CC
  1.75% Disperse Green 9 5 4 4-5 4-8
Green CC
  0.40% Disperse Violet 63 6-7 3 4-5 4-9
Violet CC
  1.33% Disperse Violet 63 7 4 5 4-9
Turquoise Blue CC
  0.50% - 7 4 4 4-8
Royal Blue CC
  2.00% - 6 4 4 4-8
Dark Blue CC
  2.00% - 6 4 4 4-9
Navy Blue CC
  2.00% - 5-6 3-4 4 4-9
Black CC-R

totop


Hicron HXF / HW Colour

Dye for highest levels of wash fastness , even after heat treatments.





C.I. NO PROPERTIES FASTNESS
H.T. Carrier Therm sol Printing HTS Light Xenon B 02 Sublimation 30 s. at
180oC
Washing 60oC (C06/C2) on PES
 
0.43% Disperse Yellow 126 ++ + 210 oC ++ 6-7 4-5 5
Flavine HXF
  1.20% Disperse Brown 19 ++ - 210 oC + 6-7 4-5 4-5
Yellow Brown HXF
  0.83% Disperse Red 311 ++ - 220 oC ++ 5-6 5 4
Rubine HXF
  1.10% Disperse Blue 284 ++ - 220 oC + 6 4-5 4-5
Blue HXF
  4.00% - ++ - 220 oC + 6 4-5 4-5
Navy Blue HXF
  4.00% - ++ - 220 oC + 6-7 4-5 4-5
Black HXF
  1.50% - ++ - 210 oC + 6-7 4-5 4-5
Scarlet HW-RS
  2.10% - ++ - 210 oC ++ 7 4 5
Red HW-4BS
  1.00% - ++ - 210 oC ++ 5-6 4-5 4-5
Red HW-2G
  4.00% - ++ - 220 oC + 6 4-5 4-5
Navy Blue HW-RS
  2.20% Disperse Red 356 ++ - 220 oC ++ 6 4-5 4-5
Red CBN-SF

totop

Hicron Luminous Colour

Dyes for brilliant shades and high visibility clothing.







C.I. NO PROPERTIES FASTNESS
H.T. Carrier Therm sol Printing HTS Light Xenon B 02 Sublimation 30 s. at
180oC
Washing 60oC (C06/C2) on PES
 
0.30% Disperse Yellow 184.1 ++ + ++ + 6 3-4 5
Luminous Yellow 10GN 400%
  1.00% Disperse Yellow 82 ++ - - + 3-4
Org.
3-4 5
Yellow 8GFF H/C
  1.60% Disperse Red 277 ++ - ++ ++ 4Y 4-5 4-5
Luminous Red G
  1.60% Disperse Red 362 ++ - ++ ++ 4-5Y 5 4-5
Luminous Red B
  1.60% Disperse Red 362.1 ++ + ++ ++ 4-5Y 5 4-5
Luminous Red 2B
  1.00% Disperse Red 364 ++ - + - 6 2-3 5
Luminous Pink 5BE
  1.00% Disperse Red 354 ++ - ++ ++ 4 4-5 4-5
Brilliant Blue SR 300%

totop

Hicron AM Colour

Dyes for highest levels of light fastness , for automotive and other demanding outlets.







C.I. NO PROPERTIES FASTNESS
H.T. Carrier Therm sol Printing HTS Light Xenon B 02 Sublimation 30 s. at
180oC
Washing 60oC (C06/C2) on PES
 
0.30% Disperse Yellow 42 ++ + ++ + 6 3-4 5
Yellow AM-42
  1.00% Disperse Yellow 71 ++ - - + 3-4
Org.
3-4 5
Yellow AM-5GL

totop

SE Type

Dyestuffs which has both levelling property and sublimation fastness. The dyestuffs of this group
possess medium exhaustion properties. Also, they have good compatibility with the dyes of
either the E type or the S type. These dyestuffs possess dyeing properties suitable for the carrier
and high - temperature dyeing methods, and so they have a very wide use in combinations with
the dyestuffs of E types and S types.

Hicron SE Colour

Cost-effective dyes with medium sublimation fastness and levelling properties.







C.I. NO PROPERTIES FASTNESS
H.T. Carrier Therm sol Printing HTS Light Xenon B 02 Sublimation 30 s. at
180oC
Washing 60 oC (C06/C2) on PES
 
0.30% Disperse Yellow 211 ++ ++ 200oC - 6 4 4-5
Yellow SE-4G 200%


1.25% Disperse Yellow 104 ++ ++ 205oC + 6-7 5 5
Yellow 5R-SE 300%
  0.70% Disperse Orange 29 ++ + 210oC + 6-7 4 5
Y/Brown SE-R 200%
  0.90% Disperse Red 54 ++ - 220oC + 6-7 4 4
Scarlet SE-3GL 200%
  0.75% Disperse Red 82 ++ - 210oC + 7 4 3-4
Red SE-B 200%
  0.80% Disperse Red 73 ++ ++ 210oC + 6 3-4 4
Rubine SE-GFL 200%
  0.63% Disperse Red 73 ++ + 190oC + 6 4 3-4
Rubine SE-GL 230%
  0.87% Disperse Violet 26 ++ ++ 200oC ++ 6-7 3-4 4-5
Bordeaux SE-BL 200%
  0.70% Disperse Blue 183.1 ++ + 210oC + 5-6 4 3-4
Blue SE-2R 200%
  0.60% Disperse Blue 148 ++ ++ 200oC + 5-6 3-4 4
Dark Blue SE-3RT
  0.50% - ++ + 190oC + 5 3-4 3-4
Dark Blue SE-3RN
  4.00% - ++ - 190oC + 5 3-4 3-4
Navy Blue ECO 330%
  4.00% - ++ - 190oC + 5 3-4 3-4
Navy Blue ECO-R 330%
  4.00% - ++ - 190oC + 6 3-4 3-4
Black D2BL
  4.00% - ++ - 190oC - 6 3-4 3-4
Black ECO 330%
  4.00% - ++ - 190oC - 6 3-4 3-4
Black ECO-R 330%
  4.00% - ++ - 190oC - 6 3-4 4
Black EN 300%
  4.00% - ++ - 190oC - 6 3-4 4
Black ECO-WR 400%

totop

 

Hicron SA Dyes

Hicron-SA

totop

 

© All Right Reserved 2008. Phisit Group Co.,Ltd Thailand.